মূল বিষয়ে যান
recentjobsolution লোগো
জনস্বাস্থ্য প্রকৌশল অধিদপ্তর

জনস্বাস্থ্য প্রকৌশল অধিদপ্তর সহকারী প্রকৌশলী (পুর) নিয়োগ পরীক্ষা ২০২৬ MCQ প্রশ্ন সমাধান — প্রশ্ন ও সমাধান (প্রশ্ন ৬১–৮০)

মোট প্রশ্ন
৯২
পূর্ণমান
৯২
সময়
৯২ মি.
প্রতি প্রশ্নে
১ নম্বর
নেগেটিভ
নেই

প্রশ্ন ও সমাধান · ৬১–৮০ / ৯২

প্রশ্ন ৬১: The maximum rate of super-elevation (e) is given by: (where symbols have their usual meanings)

  1. ক) e = v²/225Rসঠিক উত্তর
  2. খ) e = v²/424R
  3. গ) e = v²/540R
  4. ঘ) e = v²/1000R
ভুল জানান
ব্যাখ্যা: সড়ক নকশায় সুপার-এলিভেশনের প্রচলিত সূত্র e = v²/225R (v কিমি/ঘণ্টায়)।

প্রশ্ন ৬২: The percentage of water for making a cement paste of normal consistency varies from-

  1. ক) 15 - 25%
  2. খ) 25 - 35%সঠিক উত্তর
  3. গ) 35 - 50%
  4. ঘ) 50 - 60%
ভুল জানান

প্রশ্ন ৬৩: In a simple bending of beams the stress in the beam varies-

  1. ক) linearlyসঠিক উত্তর
  2. খ) parabolically
  3. গ) hyperbolically
  4. ঘ) elliptically
ভুল জানান

প্রশ্ন ৬৪: The duty of a crop is 432 hectares per cumec when the base period of the crop is 100 days. What will be the delta of the crop?

  1. ক) 100
  2. খ) 200সঠিক উত্তর
  3. গ) 432
  4. ঘ) 865
ভুল জানান

প্রশ্ন ৬৫: The uniformity co-efficient of soil is defined as the ratio of-

  1. ক) D60 to D10সঠিক উত্তর
  2. খ) D40 to D10
  3. গ) D30 to D10
  4. ঘ) D10 to D10
ভুল জানান

প্রশ্ন ৬৬: ‘War and Peace’ উপন্যাসের রচয়িতা কে?

  1. ক) লিও টলস্টয়সঠিক উত্তর
  2. খ) ডেভিড রিকার্ডো
  3. গ) কার্ল মার্কস
  4. ঘ) জেন অস্টিন
ভুল জানান

প্রশ্ন ৬৭: A staff reading taken on a bench mark or a point of known elevation is called-

  1. ক) back sight readingসঠিক উত্তর
  2. খ) intermediate reading
  3. গ) force sight reading
  4. ঘ) all of the above
ভুল জানান

প্রশ্ন ৬৮: The section in which concrete is not fully stressed to its permissible value when stress in steel reaches its maximum value, is called-

  1. ক) under reinforcedসঠিক উত্তর
  2. খ) over reinforced
  3. গ) critical section
  4. ঘ) balanced section
ভুল জানান

প্রশ্ন ৬৯: The lateral earth pressure is-

  1. ক) directly proportional to the depth of soilসঠিক উত্তর
  2. খ) inversely proportional to the depth of soil
  3. গ) directly proportional to the square of the depth of soil
  4. ঘ) inversely proportional to the square of the depth of soil
ভুল জানান

প্রশ্ন ৭০: The sum of percentage of all deleterious materials in the aggregate shall not exceed-

  1. ক) 05%সঠিক উত্তর
  2. খ) 10%
  3. গ) 15%
  4. ঘ) 20%
ভুল জানান

প্রশ্ন ৭১: Shear force at the free end of a Cantilever beam under UDL is-

  1. ক) zeroসঠিক উত্তর
  2. খ) maximum
  3. গ) minimum
  4. ঘ) negative
ভুল জানান

প্রশ্ন ৭২: Loss of pre-stressing normally ranges from-

  1. ক) 20 - 25%সঠিক উত্তর
  2. খ) 10 - 15%
  3. গ) 35 - 55%
  4. ঘ) 5 - 8%
ভুল জানান

প্রশ্ন ৭৩: A type of bond in a brick masonry consisting of alternate course of headers and stretchers is called-

  1. ক) English bondসঠিক উত্তর
  2. খ) Flemish bond
  3. গ) Stretching bond
  4. ঘ) Heading bond
ভুল জানান

প্রশ্ন ৭৪: The development of first 28 days strength of cement is an account of the hydration of-

  1. ক) dicalcium silicate
  2. খ) tricalcium silicateসঠিক উত্তর
  3. গ) tricalcium aluminate
  4. ঘ) tetra-calcium aluminoferrite
ভুল জানান

প্রশ্ন ৭৫: BOD is measure of:

  1. ক) inorganic pollution
  2. খ) organic pollutionসঠিক উত্তর
  3. গ) turbidity
  4. ঘ) organic and inorganic pollution
ভুল জানান

প্রশ্ন ৭৬: The combination of a king-post truss and queen-post truss is known as-

  1. ক) purlin roof
  2. খ) couple roof
  3. গ) collar beam roof
  4. ঘ) mansard roofসঠিক উত্তর
ভুল জানান

প্রশ্ন ৭৭: The chances of diagonal tension crack in R.C.C member reduce when-?

  1. ক) axial compression and shear force act simultaneouslyসঠিক উত্তর
  2. খ) only shear force act
  3. গ) axial tension and shear force act simultaneously
  4. ঘ) flexural and shear force act
ভুল জানান

প্রশ্ন ৭৮: The discharge through a channel of rectangular section will be maximum, if-

  1. ক) its depth is twice of its width
  2. খ) its width is twice the depthসঠিক উত্তর
  3. গ) its width equal to depth
  4. ঘ) its depth is thrice the width
ভুল জানান

প্রশ্ন ৭৯: The degree of sinuosity is the ratio between the-

  1. ক) meander length and the width of meander
  2. খ) meander length and the width of river
  3. গ) curved length and the straight air distanceসঠিক উত্তর
  4. ঘ) curved length and twice the straight air distance
ভুল জানান

প্রশ্ন ৮০: Void ratio is:

  1. ক) volume of solids/total volume
  2. খ) volume of voids/volume of solidsসঠিক উত্তর
  3. গ) volume of voids/total volume
  4. ঘ) weight of solid/volume
ভুল জানান

এই প্রশ্নপত্রে সময় ধরে পরীক্ষা দিন

৯২ প্রশ্ন · ৯২ মিনিট · সাথে সাথে ফলাফল

শুরু করুন
সব দেখুন →