মূল বিষয়ে যান
recentjobsolution লোগো
জনস্বাস্থ্য প্রকৌশল অধিদপ্তর

জনস্বাস্থ্য প্রকৌশল অধিদপ্তর সহকারী প্রকৌশলী (পুর) নিয়োগ পরীক্ষা ২০২৬ MCQ প্রশ্ন সমাধান — প্রশ্ন ও সমাধান (প্রশ্ন ৮১–৯২)

মোট প্রশ্ন
৯২
পূর্ণমান
৯২
সময়
৯২ মি.
প্রতি প্রশ্নে
১ নম্বর
নেগেটিভ
নেই

প্রশ্ন ও সমাধান · ৮১–৯২ / ৯২

প্রশ্ন ৮১: Stoke’s law is applicable in:

  1. ক) dissolve solid analysis
  2. খ) odor removal
  3. গ) bacterial removal
  4. ঘ) sedimentationসঠিক উত্তর
ভুল জানান
ব্যাখ্যা: স্টোকসের সূত্র তরলে কণার থিতানোর (সেডিমেন্টেশন) গতি নির্ণয়ে ব্যবহৃত হয়।

প্রশ্ন ৮২: The propagation of a shear crack in a pre-stressed concrete member depends upon-

  1. ক) tensile reinforcement
  2. খ) compression reinforcement
  3. গ) shear reinforcement
  4. ঘ) shape of the cross-section of the beam
ভুল জানান

প্রশ্ন ৮৩: Influence line diagram is mainly used for-

  1. ক) dead load analysis
  2. খ) point load analysis
  3. গ) moving load analysisসঠিক উত্তর
  4. ঘ) wind load analysis
ভুল জানান

প্রশ্ন ৮৪: The composite sleeper index is the index of-

  1. ক) toughness and wear resistance
  2. খ) strength and toughness
  3. গ) hardness and wear resistance
  4. ঘ) strength and hardnessসঠিক উত্তর
ভুল জানান

প্রশ্ন ৮৫: Flexible pavement transfers load by-

  1. ক) slab action
  2. খ) grain to grain actionসঠিক উত্তর
  3. গ) arch action
  4. ঘ) grain-stab-arch action
ভুল জানান

প্রশ্ন ৮৬: In case of two-way slab, the limiting deflection of the slab is-

  1. ক) primarily a function of the long span
  2. খ) primarily a function of the short spanসঠিক উত্তর
  3. গ) independent of long or short span
  4. ঘ) dependent on both long and short span
ভুল জানান

প্রশ্ন ৮৭: In a reinforced concrete beam, the shear stress distribution above the neutral axis follows a-

  1. ক) circular curve
  2. খ) inclined straight line
  3. গ) parabolic curveসঠিক উত্তর
  4. ঘ) semi-circular
ভুল জানান

প্রশ্ন ৮৮: Which method is suitable for indeterminate structure analysis?

  1. ক) method of joint
  2. খ) method of sections
  3. গ) graphical method
  4. ঘ) moment distribution methodসঠিক উত্তর
ভুল জানান

প্রশ্ন ৮৯: Which support presents both translation and reaction?

  1. ক) roller
  2. খ) hinged
  3. গ) fixed
  4. ঘ) link
ভুল জানান

প্রশ্ন ৯০: Development length of steel is required to-

  1. ক) transfer stress to concreteসঠিক উত্তর
  2. খ) reduce cracks in concrete
  3. গ) increase strength in concrete
  4. ঘ) reduce deflection of structure
ভুল জানান

প্রশ্ন ৯১: The Shear modulus of most materials with respect to the modulus of elasticity is-

  1. ক) equal to half
  2. খ) more than half
  3. গ) less than halfসঠিক উত্তর
  4. ঘ) equal
ভুল জানান

প্রশ্ন ৯২: The percentage ratio of the oxygen available in sewage to the oxygen required to satisfy one stage of BOD is termed as-

  1. ক) COD
  2. খ) oxygen consumed
  3. গ) relative stabilityসঠিক উত্তর
  4. ঘ) bio-oxygen demand
ভুল জানান

এই প্রশ্নপত্রে সময় ধরে পরীক্ষা দিন

৯২ প্রশ্ন · ৯২ মিনিট · সাথে সাথে ফলাফল

শুরু করুন
সব দেখুন →